Hydroflam® PF13 is a fire retardant product that delays ignition and limits the spread of flames in decorative papers such as kraft, crepe, embossed, fluted, etc.
Bulk and semi-bulk packaging.
We also offer to fireproof your supports in our workshops, do not hesitate to contact us for any request or quote.
Hydroflam® PF13 comes in liquid form (VOC and formaldehyde free), odorless and colorless. It is ready to use. It can be colored (powder dye or liquid acrylic) to obtain an aesthetic effect or traceability. The fireproof material, once dry, can be tinted but only with non-declassifying products.
Prevents the spread of flames and fire and reduces the development of smoke.
Must be used in dry and closed indoor areas.
The support must be dry, free of dust, oil, wax, grease, dirt, resin, etc.
Hydroflam® PF13 can be applied in 2 ways on dry, porous, double-sided support:
It is recommended to let dry between 12 and 72 hours depending on the temperature and humidity, naturally or accelerated. A slight shrinkage of the fiber may occur.
The consumption of Hydroflam® PF13 varies according to the nature, composition, mass of the support and the fire classification targeted. Generally speaking, the Hydroflam® PF13 take-up rate must be at least 25% of the mass of the support to be treated.
Ex.: to fireproof 200 g of Kraft paper, 50 g of Hydroflam® PF13 will be required. The mass of the wet paper before drying must be 250 g.
Protect against frost
