Hydroflam® BC11 comes in liquid form (VOC and formaldehyde free), odorless and colorless. It is ready to use. It can be colored (powder dye or liquid acrylic) to obtain an aesthetic effect or traceability. The fireproof material, once dry, can be stained, painted or varnished but only with non-declassifying products.

Prevents the spread of flames and fire and reduces the development of smoke.

Must be used in dry and closed indoor areas.

Implementation and preparation of the support

The support must be dry, free of dust, oil, wax, grease, dirt, resin, etc.

Hydroflam® BC11 can be applied in 3 ways on dry, porous, double-sided + edge surfaces:

• By spraying "to the limit" with a flat jet nozzle.
• By dipping (total immersion in the fireproof product).

It is recommended to let dry between 12 and 72 hours depending on the temperature and humidity, naturally or accelerated. A slight shrinkage of the fiber may occur.

Indicative yields

The consumption of Hydroflam® BC11 must be 30% of the mass of the support.

Ex.: to fireproof 200 g of cardboard, 60 g of Hydroflam® BC11 will be required. The mass of the wet cardboard before drying must be 260 g.

Protect against frost